Now you can update Samsung Galaxy S Plus GT i9001 Smartphone with the official pack value XXKQI Gingerbread 2.3.6 Firmware. It is official announce of Gingerbread updating on Samsung Galaxy S. But there won’t be any such official announcement for Jellybean 4.1 but we will surely provide you with the guide line when it come will in custom ROM Firmware form but Samsung has cleared it will provide the value pack updates. And during this course of article we have provided with the detailed guide line of how to install your Samsung Galaxy S Plus along with the precautions that you need to take before starting the process of updating. The root access will be lost if there will be any in the phone. But in case if you root your device then warranty of the device gets lost.
Precautions
- Before starting the process of updating the Samsung Galaxy S with the Gingerbread firmware you need to backup all your data and contents of the phone as they may get lost or might get corrupted.
- Your phone battery should be at least 40%, so that device does not get turn off in the middle of the process.
- Uninstall all the antiviruses’ suites or just disable them install in your device.
- Enable the KIES mode in your phone from the path “Settings” then go to “Wireless and Network” then select “USB settings” then finally go to “Samsung KIES”.
Hope you have followed all the instructions mentioned above before you start the updating in your Samsung Galaxy S Plus GT i9001. Now follow the guide line given below to precede the updating process ahead.
Steps to install Gingerbread 2.3.6 in Galaxy S Plus GT i9001
- Firstly to start the process, download the Gingerbread XXKQI 2.3.6 Firmware Package on your computer. After downloading is completed extract both the files and open Odin after that to turn off your PC to enter into the downloading mode.
- Now we also next need to make the phone enter into the downloading mode press the Volume down key and Center button simultaneously with the Power button. Once you enter in to downloading mode you will be shown with green robot indicating download mode. Then connect your device with the computer with the USB cable.
- Further install all the drivers, the installation of the drivers will be indicated by the yellow color of ID: COM section in Odin. All the drivers can be available from the Official website of Samsung.
- Now select the file “I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5” by clicking on the “PDA” tab and the file can be find from extracted files and then click on ”start button”. The update process of the firmware will take around 5-6 minutes. And after the update is applied reboot the device, the updating is completed can seen when you see the country selection option or language preference problem, disconnect the phone from PC.
- After all the updating process is completed, and home screen is seen disconnect the device from PC and make it enter to the recovery mode by just switching of the device.
- Now in recovery mode to clear the cache data of your phone, select Wipe data/factory reset along with the Wipe Cache partition and then reboot the device by selecting the option of “reboot system now” and once your device is rooted to normal mode be assure that the device is not facing any force close errors arise.
- To check whether the updating process is correctly or not go to the path “Settings to About Phone” where you will be shown the current installed Jellybean 4.1 version.
Congratulations, after following all the above mentioned you will be able to install the Gingerbread 2.3.6 firmware in Samsung Galaxy S Plus GT i9001. In case if the installation process is hindered or stopped in the middle all you need to do is just to restart the process.
No comments:
Post a Comment